top of page
Salba Sauce has been specially formulated for skateboarding. It makes ledges, kerbs and pool coping slide and grind faster, smoother and for longer.
Instructions
• Use on clean, dust free, dry, smooth concrete.
• Use a rub brick to smooth the concrete if needed.
• Apply 2-3 coats.
• Skateable in 15 to 30 minutes
• The temperature should be >15°C for best results
Drying times will vary with temperature and weather conditions. The longer you leave it to dry the better it will perform. You should have no issues as long as the product is used in warm, dry conditions. If used on damp concrete, adhesion and permeation into the concrete will be very limited so performance will be poor. It is best to plan ahead and check the weather to get it done right first time.
Note: Do not use on heavily waxed surfaces - if it is heavily waxed it should slide, so Salba Sauce is not needed. And in some cases the wax can severely inhibit the product drying.
If the wax is thin, patchy and not sliding - Salba Sauce will work fine, but expect the drying time to be 1-2 hours
Disclaimer: Do not use on another persons property without their explicit permission.
See the Technical Guide for further information.
How does it work?
• Concrete is porous so it absorbs the lacquer
• The resin fills all the all the gaps in the concrete
• This creates a more durable, smooth resin-concrete composite material
Research & Development
The formulation has been through several iterations to get to this point - it utilizes a proprietary blend of resins combined with specialist additives to give the best performance.
The goal is continuous improvement - this requires testing new materials and formulations regularly and relies on feedback from the end users.
Testing with a concrete kerb
bottom of page